> For the complete documentation index, see [llms.txt](https://knowledgebase.autorabit.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://knowledgebase.autorabit.com/product-guides/vault/vault-features/vault-connect-2/vault-connect-salesforce-administrator-user-guide.md).

# Vault Connect Salesforce Administrator User Guide

Vault Connect Setup Guide for Salesforce Administrators

### Overview

Setting up Vault Connect in a Salesforce org takes two parts, done in order: install the AuthHub package first, then configure Vault Connect. When you finish, the org is connected to AutoRABIT Vault and the objects to protect are configured.

| **Part**               | **What you do**                                                                          | **Where it's documented**                              |
| ---------------------- | ---------------------------------------------------------------------------------------- | ------------------------------------------------------ |
| 1. AuthHub package     | Install and configure the AuthHub package                                                | AuthHub Package Installation Guide (PDF, linked below) |
| 2. Vault Connect setup | Assign access, connect using the API Token from the Vault Application, configure objects | This page                                              |

This guide is for Salesforce administrators who set up Vault Connect in a customer or internal org.

### Before you begin

Check that you have these before you start Part 1.

* System Administrator access to the target Salesforce org, so you can install packages and assign permission sets
* A login to the AutoRABIT Vault application, so you can generate the API Token
* The name of the Salesforce user who will administer Vault Connect

### Part 1: Install the AuthHub package

Vault Connect depends on AuthHub, so install and configure AuthHub before anything else.

1\. Open the **AuthHub Package Installation Guide:** [https://autora-my.sharepoint.com//g/personal/harshit%5Fkumar%5Fautorabit%5Fcom/IQDc4XFjjKq2RpASpz8IHFaqAbhw1GSbpMEaV%5FSLzaliiHA?e=uSbEmo](https://autora-my.sharepoint.com/:b:/g/personal/harshit_kumar_autorabit_com/IQDc4XFjjKq2RpASpz8IHFaqAbhw1GSbpMEaV_SLzaliiHA?e=uSbEmo) Restricted content

2\. Complete every step in that guide, including the configuration steps after installation.

3\. Return to this page and continue with Part 2.

**Note:** Don't start Part 2 until AuthHub is fully configured. The Vault Connect steps assume the AuthHub package is already in place.

## Part 2: Set up Vault Connect

With AuthHub installed, give an admin user access to Vault Connect, connect the org with an API token, and choose the objects to protect.

### Step 1: Assign the Vault Connect Admin permission set

The **Vault Connect Admin** permission set lets the user see the Vault Connect app and set up the connection.

1\. In Salesforce, go to **Setup > Users > Users**.

2\. Click the name of the user who will administer Vault Connect.

3\. In the **Permission Set Assignments** related list, click **Edit Assignments**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FZKoOLGJCH6nZJ38BxoKu%2Fimage.png?alt=media&amp;token=e2b2d3ca-03e3-45d8-bc3f-b749906c2002" alt=""><figcaption></figcaption></figure>

Permission Set Assignments on the Salesforce user record

4\. Under **Available Permission Sets**, select **Vault Connect Admin** and click **Add**.

5\. Click **Save**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FcR7Nk2vVrrYhNtNXbmn8%2Fimage.png?alt=media&amp;token=19b3248f-e8c3-4945-9632-b082b3869cdf" alt=""><figcaption></figcaption></figure>

Vault Connect Admin in Available Permission Sets

**Access levels:** Vault Connect has two permission sets. Assign **Vault Connect Admin** only to the people who set up and maintain the connection.

| **Permission set**  | **Can do**                                                                                     | **Cannot do**                                                         |
| ------------------- | ---------------------------------------------------------------------------------------------- | --------------------------------------------------------------------- |
| Vault Connect Admin | Connect the org with an API token, configure objects and their fields, view configured objects | Nothing in Vault Connect is restricted                                |
| Vault Connect User  | View the objects that have been configured                                                     | Connect the org, add or remove objects, or change field configuration |

### Step 2: Open Vault Connect

1\. Log in to Salesforce as the user from Step 1.

2\. Click the **App Launcher** (the grid icon at the top left).

3\. Search for **Vault Connect** and open it.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FyBpCDyICPHiLLFHCSIUU%2Fimage.png?alt=media&amp;token=babbae71-8e20-44c5-896a-34bb7ec861af" alt=""><figcaption></figcaption></figure>

Vault Connect in the App Launcher

### Step 3: Get the API Token from the Vault Application

1\. Log in to the **AutoRABIT Vault** application.

2\. Go to the Vault Connect Tab.

3\. Select token management tab and click Generate API Token.

4\. Generate the API Token for this Salesforce org and copy it.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FLHzPgZ9g29zGC3kutdR9%2Fimage.png?alt=media&amp;token=f6f010e5-6ea4-49d4-be68-b820bc349129" alt=""><figcaption></figcaption></figure>

Vault Connect navigation in AutoRABIT Vault

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2F12tgohg0CvS5VPLjkTkn%2Fimage.png?alt=media&amp;token=f441e427-e946-4cb7-a6b4-5c429e81e638" alt=""><figcaption></figcaption></figure>

Generate Connection Token

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2F4JOgEg4AeqeAvubdfd5P%2Fimage.png?alt=media&amp;token=426be6a3-c99f-46aa-b782-74d0f468c318" alt=""><figcaption></figcaption></figure>

Token Generated Successfully

**Important:** Treat the API token like a password. Don't share it over email or chat, and don't store it in plain text. Each token works for one Salesforce org only.

### Step 4: Connect the org to AutoRABIT Vault

1\. Back in Vault Connect, on the welcome screen, click **Have an API Token**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FczB5Ncs1chppsarZ3fv3%2Fimage.png?alt=media&amp;token=2d64e0b9-7a64-4601-a540-1949f0aac448" alt=""><figcaption></figcaption></figure>

Vault Connect welcome screen

2\. On the **Connect AutoRABIT Vault** screen, paste the API Token you copied from the Vault Application into the **API Token** field.

3\. Click **Connect**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FvMbPEsp48Jxih2yBH0J0%2Fimage.png?alt=media&amp;token=6c674de6-4101-4ed6-a82c-03c1d9ceb932" alt=""><figcaption></figcaption></figure>

Connect AutoRABIT Vault

4\. Wait for the message **Connected securely to AutoRABIT Vault**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FRLc0ILDzOTM4aOU34l8h%2Fimage.png?alt=media&amp;token=166f7053-c060-437d-b476-a728ffa2f696" alt=""><figcaption></figcaption></figure>

Connected securely to AutoRABIT Vault

### Step 5: Configure objects

1\. Click **Next Step: Object Discovery**.

2\. Select the Salesforce object and click the **Configure Fields..**

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FcEA3EnIN9UW9sTHdduV4%2Fimage.png?alt=media&amp;token=ffc494ae-1713-44d3-96e8-eabbf9cd9dae" alt=""><figcaption></figcaption></figure>

Object Discovery and Configure Fields

3\. Select the fields from the **Available Fields** tab and click **Save Changes**.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FpYbDdl1yNI7wIQpeEiTk%2Fimage.png?alt=media&amp;token=097446cb-2954-47b5-b7f8-7cd8f40cc281" alt=""><figcaption></figcaption></figure>

Available Fields and Save Changes

4\. After the configuration done for the desired objects click **Go to Configured Objects** to see the configured object list.

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FEqDz13lhZD313qblNRoe%2Fimage.png?alt=media&amp;token=9c4a2630-1950-47a7-a36b-215f4c9a3505" alt=""><figcaption></figcaption></figure>

Go to Configured Objects

<figure><img src="https://1912836914-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9vAxMuDrkUkB4OXlH9CL%2Fuploads%2FtIdMtpMryxZeMwjJ1Ssa%2Fimage.png?alt=media&amp;token=0ec84a94-4611-4f62-8821-d5134f7b8920" alt=""><figcaption></figcaption></figure>

Configured objects list

### Troubleshooting

| **Problem**                                      | **What to check**                                                                                                                            |
| ------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------- |
| Vault Connect is missing from the App Launcher   | Confirm the user has the Vault Connect Admin permission set (Step 1), then log out and back in.                                              |
| Connecting fails with an invalid-token error     | Make sure the token was generated for this Salesforce org and copied in full, with no extra spaces. If it still fails, generate a new token. |
| Vault Connect setup steps don't work as expected | Confirm the AuthHub package from Part 1 is installed and fully configured.                                                                   |

Once setup is done, give view-only access by assigning the **Vault Connect User** permission set to anyone who needs to see the configured objects without changing them.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://knowledgebase.autorabit.com/product-guides/vault/vault-features/vault-connect-2/vault-connect-salesforce-administrator-user-guide.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
